Does the Product Work?
According to a lot of persons who were in his beta testing phase as well as a lot of customers using the product now. It's saving at least 15% Fuel.
Installation and Calibration
- Pull the Car Key out from the ignition.
- Find OBD2 connector(*) in your car and Plugin EcoOBD2
- Insert the key into the ignition and twist the key to the first stage. (Do not start the car)
- Press the reset button for about 5 sec. After releasing the button, just wait for a while about 30-54 sec. (EcoOBD2 will communicate and establish the connection with ECU)
- Start up the engine.
- EcoOBD2 will recognize your vehicle and your driving habits, after around 200 km/150 miles driving and thus EcoOBD2 will adjust itself to match your car perfectly for more fuel saving.
- EcoOBD2 is a Chip Tuning Box which can be plugged into OBD2 connector of your car to decrease the fuel consumption of your car.
- When it plugged into OBD2 connector, EcoOBD2 receives the information from the car computer ECU. With the received data from ECU,
- EcoOBD2 adjusts the boost pressure, the quantity of fuel, injection timing, and pressure to decrease the fuel consumption of your car.
- EcoOBD2 Chip Tuning Box does not exceed the manufacturer requirements. It works only within the tolerance of the engine.
- EcoOBD2 does not damage the engine and the car computer ECU or not cause any negative effects to the car factory setting.
- EcoOBD2 does not change any of the settings permanently. To turn back to the car's original settings, just unplug EcoOBD2 from OBD2 connector.
* IMPORTANT *
Please note we are getting a lot of calls asking if we give refunds if the product saves you less % than described on fuel Savings ?
NO, We don't offer any refunds in that case .